FSQ26 Signal Analyzer, 20 Hz - 26.5 GHz

Product Overview The R&S FSQ26 Signal Analyzer combines two instruments in one. It offers signal analysis at a demodulation bandwidth of up to 120 MHz with the dynamic range of a high-end spectrum analyzer. Frequency range: 20 Hz to 26.5 GHz Dynamic range of a high-end spectrum analyzer TOI + 25 dBm, typ. 1 dB compression +13 dBm, typ. 84 dB ACLR/3GPP with noise correction 28 MHz demodulation bandwidth (optional 120 MHz) 16 Msample I and Q memory, extendable up to 705 Msample Application firmware for digital demodulation measurement Bluetooth® GSM/EDGE 3 GPP WCDMA, HSDPA, TD-SCDMA 3GPP, LTE CDMA2000®, 1xEV-DV, 1xEV-DO o WLAN 802.11a/b/g/j WiMAX 802.16-2004, 802.16e-2005 General purpose vector signal analysis RF Performance DANL with preamplifier < -152 dBm (10Hz) SSB phase noise typ. - 133 dBc (1Hz) at 10 kHz offset, CF 640 MHz Phase-noise typ. - 160 dBc/Hz @ 10 MHz offset, CF 640 MHz TOI typ. ±25 dBm 1-dB-compression point + 13 dBm 3GPP ACLR 77 dB, 84 dB with noise correction ACLR for 4-carrier scenario: 77 dB with noise correction Accuracy 0.3 dB total level uncertainty up to 3.6 GHz IQ Downconverter IF digitizer 14 bit 81.6 MHz (20.4 MHz IF) IF digitizer 326.4 MHz (option FSQ-B72) IQ Bandwidth (RF) 28 MHz (up to 120 MHz mwith option FSQ-B72) SFDR > 80 dB IQ memory 16 Msamples each I and Q; output via GPIB or LAN Sample rate: cont. settable from 10 kHz to 81.6 MHz; e.g. 20 MHz for IEEE802.11a Speed 2.5ms sweep time in frequency domain 1 µs sweep time in time domain up to 70 remote measurements/s via GPIB up to 80 manual measurements/s (screen update)